PRODUCT DESCRIPTION

The duolift® HL 4500 STD has been designed to be in the position to lift cars from the smallest size up to medium size vans with standard roof

  • Flexible installation: the lift is available in 2 versions that can be installed in 2 different heights each at the time of the installation

  • Versymmetric® Technology: It combines the advantages of an asymmetric and a symmetric lift and improves the ergonomics when placing the arms to lift the car

  • Large swing range with 3-stage front and 3-stage rear arms

  • Controls are positioned in an ergonomic place on the primary column with clear indications of each push button

  • Power Pack is mounted high thus offering reduced noise performance

  • Shut-off bar: prevents cars to be damaged

  • Comfort lowering: the lift will automatically go up a little bit to release the carriage from the safety lock and will then automatically lower the vehicle 

  • CE stop technology instead of mechanical foot guards

  • The 3 Stage arms allows always perfect access to the pick up points of every vehicle

  • A rubber protection on the carriage ensures that there are no damages to the car door

  • Optional remote control box to be mounted on the secondary column 

Expand ▼
duolift® HL 4500 TALL

The duolift® HL 4500 TALL has been designed to be in the position to lift cars from the smallest size up to medium size vans with super high roof

LIFTS_EN
File size : 1,360.36 Kb

3 Stage Arms

feat-3stagearms

Front and rear 3 stage arms always allow a perfect access to the pick up points of the vehicle.

CARRIAGE AND ARMS

feat-carriageandarms

Very rugged design with integrated grease fitting and optimum door clearance when the car is placed on the lift. (Picture shows lift in wide installation)

Comfort lowering

feat-comfortlowering

Vehicle is lowered by simply pushing the lowering button. No need to activate the UP button to release the arms from the lock position.

Controls

feat-controls

Positioned in an ergonomic place on the primary column with clear indications of each push button.

Safety lock

feat-safetylock

Electric safety lock mechanism active during the complete lifting process is automatically released when lowering the lift thanks to the “Comfort Lowering” feature.

Versymmetric®

feat-versymmetric

It combines the advantages of an asymmetric and a symmetric lift and improves the ergonomics when placing the arms to lift the car.

Capacity 4500 Kg
Capacity lbs
Lifting times 30 s
Lowering times 30 s
Lifting height inch
Lifting height 1965 mm
Maximum pad height from floor mm
Maximum pad height from floor inch
Drive-through width inch
Drive-through width 2.380 mm
Motor 4
Power supply 400-415 VAC 3ph 50 Hz
Distance between columns mm
Distance between columns inch
Short arm extraction 570 – 1.050 mm
Short arm extraction inch
Long arm extraction 950 – 1.650 mm
Long arm extraction inch
Minimum ceiling height 4.000 mm
Minimum ceiling height inch
Minimum concrete thickness mm
Minimum concrete thickness inch

in the newsmore news

We would like to thank everybody who visited us in our booth at Automechanika, Frankfurt.
3/10/2018read more
The tyre changer of choice for high volume tyre shops.
24/5/2018read more
It is a pleasure to announce the launch of new geoliner® 630 TILT wheel aligner, which incorporates the next generation software and camera technology.
27/3/2018read more